Operable Partitions Acousti-Seal 932 商品说明书

®

932

Technical Data

10 22 26 (10650)

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

THE ACOUSTI-SEAL PAIRED PANEL SYSTEM

• Used in straight-line openings that do not re-

quire multiple locations or offset storage

• No auxiliary storage track or support required

• Panels are hinged together in groups of two

and provide quick and easy setup

• Ideally suited for applications that require

exceptional durability, acoustic control, and

frequent use

Modernfold Model

Acousti-Seal 932

• Floor-supported (932FS) paired panels are

available for installations where the existing

overhead structure cannot support the

partition’s weight

• Used in classrooms, conference or meeting

rooms, and office space

Flat Panels, Paired Panel Operation

This specification along with product information and model details can be downloaded from

SPECIFICATION - SECTION

10 22 26 (10650)

OPERABLE PARTITIONS

PART 1 - GENERAL

1.1 RELATED DOCUMENTS

gs and general provisions of the Contract,

including General and Supplementary Conditions

and Division 1 Specification Sections, apply to this

Section.

1.2 SUMMARY

A. This Section includes the following:

1. Manually operated, paired panel operable partiti-

ons.

B. Related Sections include the following:

1. Division 3 Sections for concrete

tolerances required.

2. Division 5 Sections for primary structural sup-

port, including pre-punching of support members

by structural steel supplier per operable partition

supplier’s template.

3. Division 6 Sections for wood framing and sup-

ports, and all blocking at head and jambs

as required.

4. Division 9 Sections for wall and ceiling framing

at head and jambs.

1.3 QUALITY ASSURANCE

A. Installer Qualifications: An experienced installer

who is certified in writing by the operable partition

manufacturer, as qualified to install the manufactu-

rer’s partition systems for work similar

in material, design, and extent to that indicated

for this Project.

B. Acoustical Performance: Test operable partitions in

an independent acoustical laboratory in accordance

with ASTM E90 test procedure to attain no less

than the STC rating specified. Provide a complete

and unedited written test report by the testing

laboratory upon request.

C. Preparation of the opening shall conform to the

criteria set forth per ASTM E557 Standard Practice

for Architectural Application and Installation of

Operable Partitions.

1.4 SUBMITTALS

A. Product Data: Material descriptions, construction

details, finishes, installation details, and operating

instructions for each type of operable partition,

component, and accessory specified.

B. Shop Drawings: Show location and extent of opera-

ble partitions. Include plans, elevations, sections,

details, attachments to other construction, and

accessories. Indicate dimensions, weights, conditi-

ons at openings, and at storage areas, and required

installation, storage, and operating clearances.

Indicate location and installation requirements for

hardware and track, including floor tolerances

required and direction of travel. Indicate blocking

to be provided by others.

C. Setting Drawings: Show imbedded items and cut-

outs required in other work, including support beam

punching template.

1Please contact your local Modernfold distributor for further assistance, or visit our website at .

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

D. Samples: Color samples demonstrating full range of

finishes available by architect. Verification samples

will be available in same thickness and material

indicated for the work.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Clearly mark packages and panels with numbering

systems used on Shop Drawings. Do not use perma-

nent markings on panels.

B. Protect panels during delivery, storage, and hand-

ling to comply with manufacturer’s direction and as

required to prevent damage.

1.6 WARRANTY

A. Provide written warranty by manufacturer of opera-

ble partitions agreeing to repair or replace

any components with manufacturing defects.

B. Warranty period: Two (2) years.

PART 2 – PRODUCTS

2.1 MANUFACTURERS, PRODUCTS, AND OPERA-

TION

A. Manufacturers: Subject to compliance with require-

ments, provide products by the following:

1. Modernfold, Inc.

B. Products: Subject to compliance with the require-

ments, provide the following product:

1. Acousti-Seal #932 manually operated

paired panel operable partition.

2.2 OPERATION

A. Acousti-Seal #932: Series of paired flat

panels hinged together in pairs, manually operated,

top supported with operable floor seals.

B. Final Closure (select one):

1. Horizontally expanding panel edge with remova-

ble crank

2. Hinged panel closure

3. Angle Jamb

4. Pass door closure

5. Spinner panel

2.3 PANEL CONSTRUCTION

A. Nominal 3-inch (76 mm) thick panels in manufac-

turer’s standard 48-inch (1220 mm) widths. All

panel horizontal and vertical framing members

fabricated from minimum 18-gage formed steel

with overlapped and welded corners for rigidity.

Top channel is reinforced to support suspension

system components. Frame is designed so that full

vertical edges of panels are of formed steel and

provide concealed protection of the edges of the

panel skin.

B. Panel Skin Options:

1. 1/2-inch (13 mm) tackable 100% recycled

gypsum board, class “A” rated single material

or composite layers continuously bonded to

panel frame. Acoustical ratings of panels with

this construction (select one):

a. 41 STC

b. 47 STC

c. 50 STC

2. 1/2-inch (13 mm) tackable 100% recycled

moisture resistant gypsum board, class “A”

rated single material or composite layers

continuously bonded to panel frame. Acoustical

ratings of panels with this construction (select one):

a. 41 STC

b. 47 STC

c. 50 STC

3. 1/2-inch (13 mm) NAUF medium density

fiberboard, single material or composite layers

continuously bonded to panel frame. Acoustical

ratings of panels with this construction (select one):

a. 41 STC

b. 47 STC

c. 50 STC

4. Roll-formed steel wrapping around panel edge.

Panel skins shall be lock formed and welded

directly to the frame for unitized construction.

Acoustical ratings of panels with this construc-

tion (select one):

a. 45 STC

b. 50 STC

c. 52 STC

C. Hinges for Panels, Closure Panels, Pass Doors, and

Pocket Doors shall be (select one):

1. Full leaf butt hinges, attached directly to panel

frame with welded hinge anchor plates within

panel to further support hinge mounting to

frame. Lifetime warranty on hinges. Hinges

mounted into panel edge or vertical astragal

are not acceptable.

2Please contact your local Modernfold distributor for further assistance, or visit our website at .

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

2. SOSS® Invisible laminated hinge with antifriction

segments mounted between each heat treated

link. Hinge to be attached directly to panel

frame. Welded internal hinge bracket shall sup-

port the hinge and allow for adjustment of hinge

plates. Concealed hinges mounted into panel

edge or vertical astragal are not acceptable (avai-

lable on steel skin panel only).

D. Panel Trim: No vertical trim required or allowed

on edges of panels; minimal groove appearance

at panel joints.

E. Panel Weights:

Non-Steel Skin

1. 41 STC – 6.5 lbs./square foot

2. 47 STC – 7 lbs./square foot

3. 50 STC – 8 lbs./square foot

Steel Skin

1. 45 STC – 8 lbs./square foot

2. 50 STC – 8 lbs./square foot

3. 52 STC – 11 lbs./square foot

2.4 PANEL FINISHES

A. Panel Face finish shall be (select as required):

1. Reinforced vinyl with woven backing weighing

not less than 15 ounces per lineal yard.

2. Reinforced heavy-duty vinyl with woven backing

weighing not less than 27 ounces per lineal yard.

3. Acoustical, non-woven needle punch carpet, with

fused fibers to prevent unraveling or fray of

material.

4. Wall covering and upholstery fabric with surface

treatment to resist stains.

5. Customer’s own material (subject to factory

approval).

6. Full height tackboard with vinyl or fabric covering.

a. 1/4-inch natural cork

b. 1/4-inch fiber board tackbase

7. Full height steel work surfaces (chalkboard or

dry marker board).

8. High pressure plastic laminate on MDF board.

9. Wood veneer on MDF board.

10. Uncovered for field finishing.

11. Primed for field finishing.

B. Panel Trim: Exposed panel trim of one consistent

color.

2.5 SOUND SEALS

A. Vertical Interlocking Sound Seals between panels:

Roll-formed steel astragals, with reversible tongue

and groove configuration in each panel edge for

universal panel operation. Rigid plastic astragals or

astragals in only one panel edge are not acceptable.

B. Horizontal Top Seals: Continuous contact extruded

vinyl bulb shape with pairs of non-contacting vinyl

fingers to prevent distortion without the need for

mechanically operated parts.

C. Horizontal Bottom Seals (select one):

1. Modernfold IA2 bottom seal: Automatic operable

seals providing nominal 2-inch (51 mm) opera-

ting clearance with an operating range of +1/2-

inch (13 mm) to –1-1/2-inch (38 mm) which

automatically drop as panels are positioned,

without the need for tools or cranks.

2. Modernfold IM2 bottom seal: Manually activated

bottom seals with self contained handle providing

nominal 2-inch (51 mm) operating clearance with

an operating range of +1/2-inch (13 mm) to

–1-1/2-inch(38 mm). Seal shall be operable from

panel edge or face.

3. Modernfold IC2 bottom seal: Manually activated

operable bottom seals with removable handle

providing nominal 2-inch (51 mm) operating

clearance with an operating range of +1/2-inch

(13 mm) to –1-1/2-inch (38 mm). Seal shall be

operable from panel edge or face.

2.6 SUSPENSION SYSTEM (select one)

A. #17 Suspension System

1. Suspension Tracks: Minimum 11-gage,

0.12-inch (3.04 mm) roll-formed steel track,

suitable for either direct mounting to a wood

header or supported by adjustable steel hanger

brackets, supporting the load-bearing surface of

the track, connected to structural support by

pairs of 3/8-inch (9.5 mm) diameter threaded

rods. Aluminum track is not acceptable.

a. Exposed track soffit: Steel, integral to track,

and pre-painted off-white.

2. Carriers: One all-steel trolley with steel-tired ball

bearing wheels per panel (except hinged panels).

Non-steel tires are not acceptable.

- OR -

Please contact your local Modernfold distributor for further assistance, or visit our website at .3

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

B. #30 Suspension System

1. Suspension Tracks: Track shall be structural

aluminum. Static loading of track with brackets

at 48-inch (1220 mm) centers shall show no

failure of track or brackets at 5,000 pounds

(2250 kg) point loading at mid-span. Track shall

be supported by adjustable steel hanger brackets

connected to structural support by pairs of

3/8-inch (9.5 mm) diameter threaded rods.

a. Exposed track soffit: Track soffit to be integral

to track shape and shall be powder-coated off-

white paint finish. Track must accommodate

termination of plenum sound barriers on both

sides of track for maximum sound control.

2. Carriers: One trolley per panel with 3-inch

(76.2 mm) diameter glass-reinforced nylon

all steel precision-ground ball-bearing wheels.

Steel-wheeled or reinforced polymer trolleys

on aluminum track not permitted. Trolleys shall

attach to panels with 1/2-inch (12.7 mm) diame-

ter pendent bolt mounted to welded

steel mounting plate.

- OR -

C. #14 Suspension System

1. Suspension Tracks: Minimum 7-gage, 0.18-inch

(4.57 mm) roll formed steel. Static loading of

track with brackets at 48-inch (1220 mm) cen-

ters shall show no failure of track or brackets at

5,000 pounds (2550 kg) point loading at

mid-span. Track shall be supported by adjustable

steel hanger brackets connected to structural

support pairs of 1/2-inch (13 mm) diameter

threaded rods. Brackets must support the load

bearing surface of the track.

a. Exposed track soffit: Steel, removable for

service and maintenance, attached to track

bracket without exposed fasteners, and

pre-painted off-white.

2. Carriers: One all steel trolley with steel-tired ball

bearing wheels per panel (except hinged panels).

Non-steel tires are not acceptable.

2.7 OPTIONS

A. Single Pass Doors (select one):

1. Standard hollow metal door hung in a steel frame.

ADA-compliant pass door to be equipped with

friction latch and flush pulls for panic operation.

No threshold will be permitted.

a. Pass door to be prime painted for field finishing.

door to be of one consistent color from

manufacturer’s standard offering.

2. Matching pass door same thickness and appea-

rance as panels. ADA-compliant pass door to be

trimless and equipped with friction latch and

flush pulls for panic operation. No threshold will

be permitted.

3. Hardware

a. Automatic door closures.

b. Self-Illuminated exit signs.

c. Panic hardware.

B. Work Surfaces:

1. Markerboard: White enamel on steel, bonded to

the face of the panel with horizontal trim without

exposed fasteners. Trim is not acceptable on

vertical edges to provide uninterrupted work

surface.

2. Chalkboard: Porcelain enamel on steel, bonded

to the face of the panel with horizontal trim

without exposed fasteners. Trim is not acceptable

on vertical edges to provide uninterrupted work

surface.

3. Tackboard: Minimum 1/4-inch (6.35 mm) natural

cork, covered with vinyl or fabric, with horizontal

trim without exposed fasteners. Trim is not

acceptable on vertical edges.

C. Available Accessories/Options:

1. Pocket Doors: Acousti-Seal Pocket Doors by

Modernfold, Inc., with same construction, finish,

and appearance as the adjacent panels.

2. Finished end caps.

3. Intersecting partition interface.

4. Inset window options - glazed or unglazed.

PART 3 – EXECUTION

3.1 INSTALLATION

A. General: Comply with ASTM E557, operable parti-

tion manufacturer’s written installation instructions,

Drawings and approved Shop Drawings.

B. Install operable partitions and accessories after

other finishing operations, including painting have

been completed.

C. Match operable partitions by installing panels from

marked packages in numbered sequence indicated

on Shop Drawings.

D. Broken, cracked, chipped, deformed, or unmatched

panels are not acceptable.

4Please contact your local Modernfold distributor for further assistance, or visit our website at .

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

3.2 CLEANING AND PROTECTION

A. Clean partition surfaces upon completing installa-

tion of operable partitions to remove dust, dirt,

adhesives, and other foreign materials according to

manufacturer’s written instructions.

B. Provide final protection and maintain conditions in

3.4 EXAMINATION

A. Examine flooring, structural support, and opening,

with Installer present, for compliance with require-

ments for installation tolerances and other conditi-

ons affecting performance of operable partitions.

Proceed with installation only after unsatisfactory

a manner acceptable to the manufacturer andconditions have been corrected.

Installer that insure operable partitions are without

damage or deterioration at time of Substantial

3.5 DEMONSTRATION

Completion.

A. Demonstrate proper operation and maintenance

procedures to Owner’s representative.

3.3 ADJUSTINGB. Provide Operation and Maintenance Manual to

A. Adjust operable partitions to operate smoothly,Owner’s representative.

easily, and quietly, free from binding, warp, exces-

sive deflection, distortion, nonalignment, misplace-

ment, disruption, or malfunction, throughout entire

operational range. Lubricate hardware and other

moving parts.

STC CONSTRUCTION AND TRACK SYSTEM HEIGHT LIMITATIONS

Non-Steel Skin Max Height

Welded Steel Skin Max Height

Acoust-Seal 932

41 STC47 STC50 STC45 STC50 STC52 STC

#17 Direct Mounted Track14'-2"12'-2"10'-2"10'-2"10'-2"

#17 Bracket Mounted Track18'-2"18'-2"16'-2"16'-2"16'-2"12'-2"

#14 Bracket Mounted Track18'-2"18'-2"18'-2"18'-2"18'-2"18'-2"

#30 Bracket Mounted Track18'-2"18'-2"16'-2"16'-2"12'-2"10'-2"

Please contact your local Modernfold distributor for further assistance, or visit our website at .5

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

STEEL SKIN PANEL CONSTRUCTION

Acousti-Seal 932

Panel SectionFrame Details

PANEL DETAILS ARE NOT TO SCALE

Acousti-Seal 932

Standard Panel Joint

Roll-formed skin wraps completely around the edge of

vertical 16 ga. steel channel and is locked in place,

eliminating any sharp edges and creating a unitized

panel. The outer covering is secured under the steel

astragal to prevent peeling.

ROLL-FORMED EDGES

WRAPPED AROUND,

LOCKED AND WELDED

TO VERTICAL FRAME

STEEL DUAL INTERLOCKING

VERTICAL ASTRAGAL

WITH VINYL ACOUSTICAL

GASKET

ROLL-FORMED

STEEL VERTICAL

FRAME CHANNEL

WITH NO SHARP

EDGES

MINIMUM GROOVE

AT PANEL JOINT WITH

NO VERTICAL EDGE TRIM

Model Detail from Website

NON-DISTORTING

BULB-AND-FINGER

ACOUSTICAL SWEEP

UNDERSIDE OF

TRACK/SOFFIT

FORMED STEEL SKIN

WITH NO SHARP

EDGES WELDED TO

FRAME

NOMINAL 21 GA. STEEL SKINS

WITH ACOUSTICAL BACKER

DOUBLE 16 GA.

STEEL TOP

CHANNEL WITH

HEAVY STEEL

CORNER

REINFORCEMENTS

ACOUSTICAL

INSULATION

16 GA. ROLL-FORMED

STEEL VERTICAL

FRAME CHANNEL

.75" (19 mm)

SOLID STEEL

TROLLEY MOUNT

AS-41

INSULATED BOTTOM

SEAL CAVITY WITH

DOUBLE ACOUSTICAL

SEALS

16 GA. FORMED

STEEL BOTTOM

FRAME CHANNEL

Heavy steel hinges are mounted directly to the center of

the vertical frame channel, not simply on the outside

edge of the panel. Steel plates on the back of the chan-

nel prevent buckling or bending and provide the stron-

gest hinged connection.

FINISH MATERIAL WRAPPED

AROUND PANEL EDGE AND

CAPTURED BY VERTICAL

ASTRAGAL

SELF-CONTAINDED,

SERVICEABLE

BOTTOM SEALS

DUAL-DUROMETER

FLOOR SEAL WITH

CONTOUR MATCHING

OUTER SEALS

FLOOR

ROLL-FORMED EDGES

WRAPPED AROUND, LOCKED AND

WELDED TO VERTICAL FRAME

STEEL BUTT

HINGES ATTACH

DIRECTLY TO

FRAME WITH

HEAVY STEEL

BACKER PLATES

16 GA. ROLL-FORMED

STEEL VERTICAL FRAME

CHANNEL WITH NO

SHARP EDGES

Model Detail from Website

AS-42R

6Please contact your local Modernfold distributor for further assistance, or visit our website at .

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

NON-STEEL SKIN PANEL CONSTRUCTION

Acousti-Seal 932

Panel SectionFrame Details

PANEL DETAILS ARE NOT TO SCALE

Acousti-Seal 932

Standard Panel Joint

Roll-formed vertical frame channel provides added

strength while eliminating any sharp edges. The outer

covering is secured under the steel astragal to pre-

vent peeling. The complete vertical edge of the panel

is steel for maximum durability.

BUILT-IN CONCEALED

EDGE PROTECTION

FOR PANEL SKIN

UNDERSIDE OF

TRACK/SOFFIT

FINISH MATERIAL WRAPPED

AROUND PANEL EDGE AND

CAPTURED BY VERTICAL

ASTRAGAL

FULL WIDTH

LAMINATED

PANEL SKIN WITH

CONTINUOUS

PERIMETER BOND

BULB-AND-FINGER

ACOUSTICAL SWEEP

14 GA.

REINFORCED

FORMED STEEL

TOP CHANNEL

.63" (16 mm)

SOLID STEEL

TROLLEY MOUNT

FULL PERIMETER

18 GA. STEEL

FRAME WITH

OVERLAPPED

AND WELDED

CORNERS

ACOUSTICAL

INSULATION

18 GA. ROLL-FORMED

STEEL VERTICAL FRAME

CHANNEL WITH NO

SHARP EDGES

FINE LINE PANEL

JOINT WITH NO

VERTICAL EDGE TRIM

STEEL DUAL INTERLOCKING

VERTICAL ASTRAGAL WITH

VINYL ACOUSTICAL GASKET

Model Detail from Website

NG-68

FORMED STEEL

BOTTOM FRAME

CHANNEL WITH

BOTTOM EDGE

PROTECTION

Heavy steel hinges are mounted directly to the cen-

ter of the vertical frame channel, not simply on the

outside edge of the panel. Steel plates on the back

of the channel prevent buckling or bending and

provide the strongest hinge connection.

STEEL BUTT HINGES ATTACH

DIRECTLY TO HEAVY STEEL

BACKER PLATES WELDED TO

FRAME

FINISH MATERIAL WRAPPED

AROUND PANEL EDGE AND

CAPTURED BY VERTICAL

ASTRAGAL

INSULATED BOTTOM

SEAL CAVITY

WITH DOUBLE

ACOUSTICAL SEALS

FULL WIDTH

LAMINATED

PANEL SKIN WITH

CONTINUOUS

PERIMETER BOND

SELF-CONTAINED,

SERVICEABLE

BOTTOM SEALS

DUAL-DUROMETER

FLOOR SEAL WITH

CONTOUR MATCHING

OUTER SEALS

ACOUSTICAL

INSULATION

18 GA. ROLL-FORMED

STEEL VERTICAL FRAME

CHANNEL WITH NO

SHARP EDGES

FINE LINE PANEL

JOINT WITH NO

VERTICAL EDGE TRIM

BUILT-IN CONCEALED

EDGE PROTECTION

FOR PANEL SKIN

STEEL DUAL

INTERLOCKING VERTICAL

ASTRAGAL WITH VINYL

ACOUSTICAL GASKET

FLOOR

Model Detail from Website

NG-69R

7Please contact your local Modernfold distributor for further assistance, or visit our website at .

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

SUSPENSION SYSTEM OPTIONS

#17 Track System Direct Mount

DOUBLE 2" (51 mm)

× 10" (254 mm) MIN.

HEADER REQUIRED

@ STACK AREA

CONTINUOUS AND LEVEL

HEADER NOT BY

MODERNFOLD

RECOMMENDED SOUND

BAFFLE NOT BY

MODERNFOLD

2

.

1

2

"

2

.

5

0

"

(

5

4

m

m

)

(

6

4

m

m

)

M

I

N

.

#14 × 2.50" (64 mm)

TYPE A SCREW

@6" O.C

#17 STEEL TRACK AND

ALUMINUM GUIDE RAIL

PREPAINTED OFF WHITE

STEEL, 4-WHEEL

PRECISION GROUND AND

SEALED BALLBEARING

TROLLEYS

.75"

(19 mm)

VINYL TOP SEAL

Model Detail from Website

4.25"

(108 mm)

TRACK

AS-04

#17 Track System Bracket Mount

5.75"

(146 mm)

BRACKET

4.50"

(114 mm)

GAGE

4

"

(

1

0

2

m

m

)

M

I

N

.

.38" (10 mm) DIA.

× 7" (178 mm) LONG

HANGER RODS

BY MODERNFOLD

RECOMMENDED

SOUND BAFFLE

HANGER BRACKET

BY MODERNFOLD

FINISHED

CEILING

.75"

(19 mm)

#17 STEEL TRACK AND

ALUMINUM GUIDE RAIL

PREPAINTED WHITE

STEEL, 4-WHEEL

BALLBEARING TROLLEYS

VINYL TOP SEAL

Model Detail from Website

4.25"

(108 mm)

TRACK

AS-03

8Please contact your local Modernfold distributor for further assistance, or visit our website at .

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

SUSPENSION SYSTEM OPTIONS

#14 Track System Bracket Mount

7.50" (191 mm)

BRACKET

5" (127 mm) GAGE

1

3

"

(

3

3

0

m

m

)

M

I

N

I

M

U

M

.50" (13 mm) DIA

× 9" (229 mm) LONG

HANGER RODS

BY MODERNFOLD

HANGER BRACKET

BY MODERNFOLD

.75"

(19 mm)

FINISHED

CEILING

CONTINUOUS STEEL

TRACK

STEEL BALLBEARING

TROLLEYS

OFF WHITE

CONTINUOUS STEEL

SOFFIT TRIM PAN

BY MODERNFOLD

VINYL TOP SEAL

10.25" (260 mm)

SOFFIT

Model Detail from Website

AS-10

Please contact your local Modernfold distributor for further assistance, or visit our website at .9

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

SUSPENSION SYSTEM OPTIONS

#30 Track System Standard Spacing

3.50"

(89 mm)

GAGE

2.50"

(64 mm)

GAGE

STRUCTURAL

SUPPORT NOT

BY MODERNFOLD

.38" (10 mm) DIA

× 9" (229 mm)

LONG HANGER

RODS BY

MODERNFOLD

HANGER BRACKET

BY MODERNFOLD

#30 Track System Optional Wider Spacing

5.50"

(140 mm)

GAGE

4.50"

(114 mm)

GAGE

STRUCTURAL

SUPPORT NOT

BY MODERNFOLD

1

3

"

(

3

3

0

m

m

)

M

I

N

I

M

U

M

1

3

"

(

3

3

0

m

m

)

M

I

N

I

M

U

M

.38" (10 mm) DIA

× 9" (229 mm)

LONG HANGER

RODS BY

MODERNFOLD

HANGER

BRACKET BY

MODERNFOLD

.75"

(19 mm)

CLG

LINE

STEEL

BALLBEARING

TROLLEYS

VINYL TOP SEAL

CLG

LINE

.75"

(19 mm)

STEEL

BALLBEARING

TROLLEYS

VINYL

TOP SEAL

F

A

B

R

I

C

A

T

I

O

N

H

E

I

G

H

T

F

A

B

R

I

C

A

T

I

O

N

H

E

I

G

H

T

5.38"

(137 mm)

TRACK

5.38"

(137 mm)

TRACK

Model Detail from Website

Model Detail from Website

AS-119

AS-120

10Please contact your local Modernfold distributor for further assistance, or visit our website at .

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

PANEL, WORK SURFACE, AND PASS DOOR OPTIONS

SELF-LUMINOUS EXIT SIGNS

(SURFACE OR RECESSED MOUNTED)

NO VERTICAL TRIM

ON PANEL (TYPICAL)

6

'

-

8

"

(

2

0

3

3

m

m

)

O

R

7

'

-

0

"

(

2

1

3

4

m

m

)

"H" TYPE PASS

DOOR

SELF-LUMINOUS

EXIT SIGN (OPTIONAL

LOCATION)

CHALKBOARD, MARKERBOARD,

OR TACKBOARD (NO VERTICAL

TRIM REQUIRED)

RECESSED HAND PULL WITH

FRICTION LATCH (ADA COMPLIANT)

RECESSED ERASER

HOLDER

FLOOR SEAL OPTIONS

2-inch Automatic Seal2-inch Manual Seal

2"

(51 mm)

AUTOMATIC DROP SEAL

PROVIDES 2" (51 mm)

OPERATING CLEARANCE

+ .50" (13 mm) / –1.50" (38 mm)

FLOOR

2"

(51 mm)

MANUAL DROP SEAL

ACCOMMODATES

+ .50" (13 mm) TO

–1.50" (38 mm)

DEFLECTION AND/OR

FLOOR VALANCE

FLOOR

Model Detail from WebsiteModel Detail from Website

AS-12C

Please contact your local Modernfold distributor for further assistance, or visit our website at .

AS-11

11

V

A

R

I

A

B

L

E

4

'

-

0

"

(

1

2

2

0

m

m

)

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

POCKET ENCLOSURE AND STACKING OPTIONS

Expandable Jamb Closure -

Even Panel Quantity

Expandable Jamb Closure -

Odd Panel Quantity

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

7

"

(

1

7

8

m

m

)

M

I

N

.

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

4

"

(

1

0

2

m

m

)

M

I

N

.

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

4

"

(

1

0

2

m

m

)

M

I

N

.

SIDE R

SIDE L

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

7

"

(

1

7

8

m

m

)

M

I

N

.

SIDE R

SIDE L

OPTIONAL

POCKET

STACK

DEPTH

NO. OF PANELS

× 3.75" (95 mm) + 2" (51 mm)

OPTIONAL

POCKET

STACK

DEPTH

NO. OF PANELS

× 3.75" (95 mm) + 2" (51 mm)

Remote Expandable Jamb Closure

STACK TH

PLUS

6" (152 mm)

MIN.

TYPE II

POCKET

DOOR

Angle Jamb Closure -

Odd Panel Quantity

1

/

2

P

A

N

E

L

W

I

D

T

H

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

P

L

U

S

7

"

(

1

7

8

m

m

)

1

0

"

(

2

5

4

m

m

)

M

I

N

.

M

I

N

.

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

7

"

(

1

7

8

m

m

)

M

I

N

.

SIDE R

SIDE L

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

4

"

(

1

0

2

m

m

)

M

I

N

.

SIDE R

SIDE L

STACK

DEPTH

NO. OF PANELS

× 3.75" (95 mm) + 2" (51 mm)

OPTIONAL

POCKET

STACK

DEPTH

NO. OF PANELS

× 3.75" (95 mm) + 5" (127 mm)

12Please contact your local Modernfold distributor for further assistance, or visit our website at .

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

POCKET ENCLOSURE AND STACKING OPTIONS

Angle Jamb Closure -

Even Panel Quantity

Pass Door Closure

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

7

"

(

1

7

8

m

m

)

M

I

N

.

T

R

A

I

L

P

A

N

E

L

S

I

Z

E

P

L

U

S

4

"

(

1

0

2

m

m

)

M

I

N

.

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

4

"

(

1

0

2

m

m

)

M

I

N

.

SIDE R

SIDE L

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

7

"

(

1

7

8

m

m

)

M

I

N

.

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

4

"

(

1

0

2

m

m

)

M

I

N

.

SIDE R

SIDE L

OPTIONAL

POCKET

STACK

DEPTH

NO. OF PANELS

× 3.75" (95 mm) + 5" (127 mm)

STACK

DEPTH

NO. OF PANELS

× 3.75" (95 mm) + 4" (102 mm)

Bi-fold Hinged Panel Closure

Single Hinged Panel Closure

1

/

2

P

A

N

E

L

W

I

D

T

H

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

P

L

U

S

4

"

(

1

0

2

m

m

)

7

"

(

1

7

8

m

m

)

M

I

N

.

M

I

N

.

1

/

2

P

A

N

E

L

W

I

D

T

H

1

/

2

P

A

N

E

L

W

I

D

T

H

P

L

U

S

P

L

U

S

4

"

(

1

0

2

m

m

)

7

"

(

1

7

8

m

m

)

M

I

N

.

M

I

N

.

SIDE R

SIDE L

SIDE R

SIDE L

OPTIONAL

POCKET

STACK

DEPTH

NO. OF PANELS

× 3.75" (95 mm) + 4" (102 mm)

STACK

DEPTH

OPTIONAL

NO. OF PANELS

POCKET

× 3.75" (95 mm) + 4" (102 mm)

Please contact your local Modernfold distributor for further assistance, or visit our website at .13

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

PANEL CROSS SECTIONS

Hinged Jamb

Expandable Panel w/ Jamb

CAULKING BETWEEN

JAMB AND WALL

CAULKING

BETWEEN

JAMB AND

WALL

0" TO 5.75"

(146 mm)

TRAVEL

EXPANDABLE PANEL

NOSE - FINISH

SAME AS PANELS

Model Detail from WebsiteModel Detail from Website

AS-31RAS-34

Expandable Panel w/ Bulb Seal

Angle Jamb

0" TO 5.75"

(146 mm)

TRAVEL

EXPANDABLE PANEL

NOSE

END CAP

VINYL SWEEP

VINYL BULB SEAL

CAULKING

BETWEEN

JAMB AND WALL

STEEL ANGLE WRAPPED

WITH FINISH MATERIAL

Model Detail from Website

Model Detail from Website

AS-36

AS-39R

14Please contact your local Modernfold distributor for further assistance, or visit our website at .

®

932

Technical Data

10 22 26

Operable Partitions

ACOUSTI-SEAL

®

900 SERIES TECHNICAL DATA

PANEL CROSS SECTIONS

Hinged Panel Meeting w/ Bulb Seal

Hinged Panel Meeting

w/ Pass Door Astragal

1"

(25 mm)

1.50"

(38 mm)

REF.

STOPS

Model Detail from Website

Model Detail from Website

ALUMINUM ASTRAGAL

COVERED TO MATCH

PANEL FINISH (OPTIONAL)

AS-69R

Nominal Fixed Jamb

CAULKING BETWEEN

JAMB AND WALL

AS-43L

Bulb Seal and Intersection

VINYL BULB

SEAL

Model Detail from Website

3

.

0

0

"

(

7

6

m

m

)

R

E

F

VINYL SEAL AND

STEEL ASTRAGAL

Model Detail from Website

AS-21

Variable Fixed Jamb

CAULKING

BETWEEN JAMB

AND WALL

AS-49

Model Detail from Website

AS-22

Please contact your local Modernfold distributor for further assistance, or visit our website at .15

®

932

Technical Data

10 22 26

Operable Partitions

Modernfold, Inc.

215 West New Road

Greenfield, IN 46140

Toll Free: 800.869.9685

email:*******************

A DORMA Group Company

Form No. 2502 8/08 - EREV 9/09

Manufacturer reserves the right to change design or specifications at any time without notice.

Please contact your local Modernfold distributor for further assistance, or visit our website at .