admin 管理员组文章数量: 1086019
2023年12月19日发(作者：属性相克表洛克王国)
Aruba 交换机基本操作命令
登录：
(Aruba2400)
User: admin
Password: ***** （缺省口令通常是admin）
NOTICE
NOTICE -- This switch has active licenses that will expire in 26 days
NOTICE
NOTICE -- See 'show license' for details.
NOTICE
(Aruba2400) >en
Password:***** （缺省口令通常是admin）
(Aruba2400) #
恢复出厂值：
(Aruba2400) #write erase
All the configuration will be deleted. Press 'y' to proceed :
Write Erase successful
(Aruba2400) #reload
Do you really want to reset the system(y/n): y
――――――――
Aruba交换机重启
――――――――
初始化配置：
Enter System name [Aruba2400]:
Enter VLAN 1 interface IP address [172.16.0.254]:
Enter VLAN 1 interface subnet mask [255.255.255.0]:
Enter IP Default gateway [none]:
Enter Switch Role, (master|local) [master]:
Enter Country code (ISO-3166),
You have chosen Country code CN for China (yes|no)?: y
Enter Password for admin login (up to 32 chars): *****
Re-type Password for admin login: *****
Enter Password for enable mode (up to 15 chars): *****
Re-type Password for enable mode: *****
Do you wish to shutdown all the ports (yes|no)? [no]:
Current choices are:
System name: Aruba2400
VLAN 1 interface IP address: 172.16.0.254
VLAN 1 interface subnet mask: 255.255.255.0
IP Default gateway: none
Switch Role: master
Country code: CN
Ports shutdown: no
If you accept the changes the switch will restart!
Type
Do you wish to accept the changes (yes|no)y
Done.
保存配置文件：
(Aruba2400) >en
Password:*****
(Aruba2400) #configure t
(Aruba2400) # copy running-config tftp: 192.168.4.100
恢复配置文件：
(Aruba2400) >en
Password:*****
(Aruba2400) #configure t
(Aruba2400) (config) #copy tftp: 172.16.0.100 flash:
(Aruba2400) (config) #copy flash: flash:
(Aruba2400) (config) #boot config-file
(Aruba2400) (config) #reload
Do you really want to reset the system(y/n): y
System will now restart!
Image 升级：
(Aruba200) #show boot
Config File:
Boot Partition: PARTITION 0
(Aruba2400) #show image version
(Aruba2400) #copy tftp: 172.16.1.50 A2400_FCS2.0.X_6577 system: partition 1
Upgrading partition 1
(Aruba2400) #reload
(Aruba200) #boot system partition 0
PC：
telnet 172.16.0.254 2300
connect 1/2
重启AP
4秒内Stop
>purgenv
>boot
login as: admin
**********.22.20'spassword:
(Aruba-master) >enable
Password:******
(Aruba-master) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(Aruba-master) (config) #telnet soe
Once SOE is enabled, you can connect to the AP serial port with the
following procedure:
1
2
3
Telnet to the Aruba mobility controller using port 2300
Log in using the admin account
Connect to the Ethernet port that the AP is attached to
User: admin
Password: *****
Available commands:
connect
exit (no args)
soe> connect 2/0
Connecting to 2/0 at 9600 baud 8N1
Type "~." to disconnect
版权声明：本文标题：Aruba2400移动控制器基本操作-v 内容由网友自发贡献，该文观点仅代表作者本人， 转载请联系作者并注明出处：http://roclinux.cn/b/1702955610a437305.html， 本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。
发表评论